manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 54

5-6

EBU10842

Engine oil

Make sure the engine oil is at the specified
level. Add oil as necessary. (See pages 8-12–
8-17.)

CAUTION:

_ 

●

In order to prevent clutch slippage
(since the engine oil also lubricates
the clutch), do not mix any chemical
additives. Do not use oils with a diesel
specification of “CD” or oils of a high-
er quality than specified. In addition,
do not use oils labeled “ENERGY
CONSERVING II” or higher. 

●

Make sure that no foreign material en-
ters the crankcase. 

_

EBU00493

Final gear oil

Make sure the final gear oil is at the specified
level. Add oil as necessary. (See pages 8-17–
8-20 for details.)

If desired, an SAE 80W90 hypoid gear oil may
be used for all conditions.

NOTE:

GL-4 is a quality and additive rating, GL-5 or
GL-6 rated hypoid gear oils may also be used.

EBU00678

Differential gear oil

Make sure the differential gear oil is at the
specified level. Add oil as necessary. (See
pages 8-20–8-22 for details.)

Recommended engine oil type and 
quantity: 

See page 10-2. 

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

Recommended oil:

SAE 80 API GL-4 Hypoid gear oil

EE.book  Page 6  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands