manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 135

8-23

3. If the coolant is at or below the minimum

level mark, remove panel D (See pages
8-7–8-8 for panel removal and installa-
tion procedures.), remove the reservoir
cap, add coolant to the maximum level
mark, install the reservoir cap, and then
install the panel.

CAUTION:

_ 

Hard water or salt water is harmful to the
engine. You may use soft water if you can-
not get distilled water. 

_

NOTE:

_ 

●

If water is added, have a Yamaha dealer
check the antifreeze content of the cool-
ant as soon as possible. 

●

The radiator fan operation is completely
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator. 

_

If your ATV overheats, see page 8-62 for de-
tails. 

Coolant reservoir capacity 
(up to the maximum level mark): 

0.25 L (0.22 Imp qt, 0.26 US qt)

EE.book  Page 23  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands