manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 37

4-15

EBU00070

Front brake lever

The front brake lever is located on the right
handlebar. Pull it toward the handlebar to ap-
ply the front brake.

1. Front brake lever

EBU00732

Brake pedal and rear brake lever

The brake pedal is located on the right side of
the ATV and the rear brake lever is located on
the left handlebar. Push down on the pedal or
pull the lever toward the handlebar to apply
the rear brake. 

WARNING

POTENTIAL HAZARD

Improper adjustment of the speed limit-
er and throttle.

WHAT CAN HAPPEN

The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an acci-
dent or be injured.

HOW TO AVOID THE HAZARD

Do not turn the adjusting screw out
more than 12 mm (0.47 in). Always make
sure the throttle lever free play is adjust-
ed to 3.0–5.0 mm (0.12–0.20 in). See
page 8-38.

EE.book  Page 15  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands