manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 33

4-11

1. Lever
2. On-Command four-wheel drive switch “2WD”/“4WD”

On-Command four-wheel drive switch
“2WD”/“4WD” 

To change from 2WD to 4WD, stop the ATV,
and then set the switch to “4WD”. When the
ATV is in 4WD, the 4WD indicator “

” will

come on in the speedometer unit display. 
To change from 4WD to 2WD, stop the ATV,
be sure the lever is set to position 

a

, and then

set the switch to “2WD”.

WARNING

POTENTIAL HAZARD 
Changing from 2WD to 4WD or from
4WD to 4WD-LOCK (“DIFF.LOCK”), or
vice-versa while the ATV is moving. 
WHAT CAN HAPPEN 
The ATV handles differently in 2WD
than in 4WD and in 4WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 4WD to 4WD-LOCK, or
vice-versa while moving may cause the
ATV to unexpectedly handle differently.
This could distract the operator and in-
crease the risk of losing control and an
accident. 
HOW TO AVOID THE HAZARD 
Always stop the ATV before changing
from 2WD to 4WD or from 4WD to
4WD-LOCK, or vice-versa.

EE.book  Page 11  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands