manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 53

5-5

Gasohol 

There are two types of gasohol; gasohol con-
taining ethanol and that containing methanol.
Gasohol containing ethanol can be used if
ethanol content does not exceed 10%. Gaso-
hol containing methanol is not recommended
by Yamaha because it may cause fuel system
damage or vehicle performance problems.

1. Fuel level

2. Fuel tank filler tube

WARNING

POTENTIAL HAZARD 
Improper care when refueling. 
WHAT CAN HAPPEN 
Fuel can spill, which can cause a fire
and severe injury. 
Fuel expands when it heats up. If the
fuel tank is overfilled, fuel could spill out
due to heat from the engine or the sun. 
HOW TO AVOID THE HAZARD 
Do not overfill the fuel tank. Be careful
not to spill fuel, especially on the engine
or exhaust pipe. Wipe up any spilled fuel
immediately. Be sure the fuel tank cap is
closed securely. 
Do not refuel right after the engine has
been running and is still very hot.

EE.book  Page 5  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands