manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 69

6-10

EBU00221

Accessories and loading

EBU00222

Accessories

Accessories can affect the handling and con-
trol of your ATV. Keep the following in mind
when considering an accessory or operating
an ATV which has accessories.

●

Choose only accessories designed for your
ATV. Your Yamaha dealer has a variety of
genuine Yamaha accessories. Other ac-
cessories may also be available on the
market. However, it is not possible for
Yamaha to test all non-Yamaha accesso-
ries, nor have any control over the quality or
suitability of them. Choose a genuine
Yamaha accessory, or one that is equiva-
lent in design and quality.

●

Accessories should be rigidly and securely
mounted. An accessory which can shift po-
sition or come off while you are riding could
affect your ability to control the ATV.

●

Do not mount an accessory where it could
interfere with your ability to control the ATV.
Examples include (but are not limited to) a
heavy or bulky object attached to the han-
dlebars which could make steering difficult,
an accessory that limits your ability to move
around on the seat, or one that limits your
view.

●

Use extra caution when riding an ATV with
accessories. The ATV may handle differ-
ently than it does without accessories.

EE.book  Page 10  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands