manualshive.com logo in svg

Yamaha Kodiak YFM45FAV, Owner'S Manual

Share
Download
Yamaha Kodiak YFM45FAV Owner'S Manual Download Page 24

4-2

EBU08020

Indicator and warning lights 

1. Differential gear lock indicator light “DIFF. LOCK”
2. Low-range indicator light “L”
3. High-range indicator light “H”
4. Neutral indicator light “N”
5. Reverse indicator light “R”
6. Park indicator light “P”
7. Differential gear lock indicator “

”

8. Coolant temperature warning light “

”

EBU10601

Differential gear lock indicator light “DIFF.
LOCK” 

This indicator light and the differential gear
lock indicator in the display come on when the
differential gear lock switch is set to the “4WD-
LOCK” position.

NOTE:

_ 

When the switch is set to “LOCK”, the differ-
ential gear lock indicator light will flash until
the differential gear is locked. 

_ 

EBU11220

Low-range indicator light “L” 

This indicator light comes on when the drive
select lever is in the “L” position. 

EBU01064

High-range indicator light “H” 

This indicator light comes on when the drive
select lever is in the “H” position.

DIFF.

LOCK

EE.book  Page 2  Friday, May 6, 2005  8:59 AM

Summary of Contents for Kodiak YFM45FAV



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands