![background image](http://html.mh-extra.com/html/yamaha/dm-1000/dm-1000_owners-manual_896461064.webp)
64
Chapter 6—Input Channels
DM1000 Version 2—Owner’s Manual
The parameters on these three pages (and the procedure for setting them) are the same.
A
DELAY SCALE
The following buttons determine the units of the delay value shown below the msec
value.
•
meter
............................. Units are set to meters.
•
feet
................................. Units are set to feet.
•
sample
........................... Units are set to samples.
•
beat
................................ Units are set to beats.
•
frame
............................. Units are set to timecode frames.
B
GANG button
When this button is turned on (highlighted), the delay time for each channel in a chan-
nel pair can be set simultaneously. When this option is turned off, the delay time can be
set for each channel in a channel pair individually.
C
Channel section
You can set individual delay parameters here. The delay parameters include the follow-
ing items:
•
msec
............................... This parameter sets the delay time in milliseconds.
• meter/feet/sample/
beat/frame
.................... The delay time can be set using units of meters, feet, samples,
beats, or frames, which you select by using the DELAY SCALE
buttons.
•
MIX
................................ This parameter sets the mix balance of dry (Input Channel)
and wet (delayed) signals.
•
FB.GAIN
....................... This parameter sets the amount of delay feedback.
Tip:
• The delay time range depends on the sampling rate at which the DM1000 is operating. (For
example, at 44.1 kHz, the range is 0 through 984.1 msec.)
• If you select the DELAY SCALE meter or feet button, the distance value can be converted to
the delay time based on sonic speeds (about 340 m/sec at 15 degrees Celsius). This option is
useful if you wish to correct the timing difference between two sound sources that are far
apart.
• If you select the DELAY SCALE beat button, a parameter box for setting a note that repre-
sents the beat and a parameter box for a tempo (BPM) setting appear below the DELAY
SCALE parameter. Setting the note and BPM settings in these parameter boxes enables you
to set a delay time that synchronizes to the song tempo.
2
1
3
Summary of Contents for DM 1000
