![background image](http://html.mh-extra.com/html/yamaha/dm-1000/dm-1000_owners-manual_896461313.webp)
Effects Parameters
313
DM1000 Version 2—Owner’s Manual
Appendix
HQ. PITCH
One input, two output high-quality pitch shifter.
DUAL PITCH
Two input, two output pitch shifter.
ROTARY
One input, two output rotary speaker simulator.
RING MOD.
Two input, two output ring modulator.
MOD. FILTER
Two input, two output modulation filter.
DISTORTION
One input, two output distortion effect.
Parameter
Range
Description
PITCH
–12 to +12 semi-
tones
Pitch shift
FINE
–50 to +50 cents
Pitch shift fine
DELAY
0.0–1000.0 ms
Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
MODE
1–10
Pitch shift precision
SYNC
OFF, ON
Tempo parameter sync on/off
NOTE
1
1.
(Maximum value depends on the tempo setting)
Used in conjunction with
TEMPO to determine DELAY
Parameter
Range
Description
PITCH 1
–24 to +24 semi-
tones
Channel #1 pitch shift
FINE 1
–50 to +50 cents
Channel #1 pitch shift fine
LEVEL 1
–100 to +100%
Channel #1 level (plus values for
normal phase, minus values for
reverse phase)
PAN 1
L63 to R63
Channel #1 pan
DELAY 1
0.0–1000.0 ms
Channel #1 delay time
FB. G 1
–99 to +99%
Channel #1 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
PITCH 2
–24 to +24 semi-
tones
Channel #2 pitch shift
FINE 2
–50 to +50 cents
Channel #2 pitch shift fine
LEVEL 2
–100 to +100%
Channel #2 level (plus values for
normal phase, minus values for
reverse phase)
PAN 2
L63 to R63
Channel #2 pan
DELAY 2
0.0–1000.0 ms
Channel #2 delay time
FB. G 2
–99 to +99%
Channel #2 feedback gain (plus
values for normal-phase feed-
back, minus values for
reverse-phase feedback)
MODE
1–10
Pitch shift precision
SYNC
OFF, ON
Tempo parameter sync on/off
NOTE 1
1
1.
(Maximum value depends on the tempo setting)
Used in conjunction with
TEMPO to determine Channel
#1 delay
NOTE 2
1
Used in conjunction with
TEMPO to determine Channel
#2 delay
Parameter
Range
Description
ROTATE
STOP, START
Rotation stop, start
SPEED
SLOW, FAST
Rotation speed (see SLOW and
FAST parameters)
SLOW
0.05–10.00 Hz
SLOW rotation speed
FAST
0.05–10.00 Hz
FAST rotation speed
DRIVE
0–100
Overdrive level
ACCEL
0–10
Acceleration at speed changes
LOW
0–100
Low-frequency filter
HIGH
0–100
High-frequency filter
Parameter
Range
Description
SOURCE
OSC, SELF
Modulation source: oscillator or
input signal
OSC FREQ
0.0–5000.0 Hz
Oscillator frequency
FM FREQ.
0.05–40.00 Hz
Oscillator frequency modulation
speed
FM DEPTH
0–100%
Oscillator frequency modulation
depth
SYNC
OFF, ON
Tempo parameter sync on/off
NOTE FM
1
1.
Used in conjunction with
TEMPO to determine FM FREQ
Parameter
Range
Description
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
PHASE
0.00–354.38
degrees
Left-channel modulation and
right-channel modulation phase
difference
TYPE
LPF, HPF, BPF
Filter type: low pass, high pass,
band pass
OFFSET
0–100
Filter frequency offset
RESO.
0–20
Filter resonance
LEVEL
0–100
Output level
SYNC
OFF, ON
Tempo parameter sync on/off
NOTE
1
1.
Used in conjunction with
TEMPO to determine FREQ
Parameter
Range
Description
DST TYPE
DST1, DST2,
OVD1, OVD2,
CRUNCH
Distortion type (DST = distor-
tion, OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
TONE
–10 to +10
Tone
N. GATE
0–20
Noise reduction
Summary of Contents for DM 1000
