![background image](http://html.mh-extra.com/html/yamaha/dm-1000/dm-1000_owners-manual_896461244.webp)
244
Chapter 17—Remote Control
DM1000 Version 2—Owner’s Manual
7 To start remote control, press the DISPLAY ACCESS [REMOTE] button, then
press the [F3] button to display the Remote | Machine page.
This page contains the following parameters:
A
LOCATE/TIME section
This section enables you to set the locate points.
•
LOCATE 1–8
................. These buttons locate the positions (specified by the TIME val-
ues) on external machines.
•
RTZ
................................ This Return To Zero button locates the zero timecode position
on external machines.
•
TIME
.............................. Locate points are specified in hour/minute/second/frame for-
mat.
•
CAPTURE
..................... These buttons capture the current position on external
machines and import the information into the TIME column.
B
TRACK ARMING section
This section controls the tracks on external machines.
•
1–24 buttons
................. These buttons turn external tracks 1–24 on or off, and set or
cancel their Record Ready mode.
•
ALL CLEAR
.................. Turning on this button switches all buttons (1–24) simulta-
neously.
C
TRANSPORT section
This section enables you to control the transport functions on external machines.
•
REW
............................... This button starts rewind on external machines.
•
FF
................................... This button starts fast forward on external machines.
•
STOP
.............................. This button stops external machines.
•
PLAY
.............................. This button starts playback on external machines.
•
REC
................................ This button is used in conjunction with the PLAY button to
start recording on external machines.
D
FRAMES
This parameter selects the timecode frame rate.
8 To control the transport functions, move the cursor to the desired button in
the TRANSPORT section, then press [ENTER].
9 If you desire, move the cursor to the buttons and parameters in the
LOCATE/TIME section and the TRACK ARMING section, then press the
[ENTER] button or rotate the Parameter wheel to control the transport func-
tions on external machines.
1
2
3
4
Summary of Contents for DM 1000
