![background image](http://html.mh-extra.com/html/yamaha/dm-1000/dm-1000_owners-manual_896461261.webp)
Crossfade via ESAM Commands
261
DM1000 Version 2—Owner’s Manual
Controlling the DM1000
from a V
ideo Editor
19
4 Press the DISPLAY ACCESS [SETUP] button repeatedly until the Setup | Time
Ref page appears.
5 Move the cursor to the FRAMES parameter, then select the desired frame
rate.
The Transition Time transmitted from a video editor is expressed in frames. Match the
frame rate.
6 Press the DISPLAY ACCESS [REMOTE] button repeatedly until the Remote |
ESAM 1-32 page or ESAM 33-48 page appears.
7 Assign Input Channels 1-48 to Machines A-H. (Specify which machine is con-
nected to which channel.)
To add or delete machines to or from Input Channels, move the cursor to a desired machine
(A-H), then press the channel [SEL] button. You cannot assign a channel to multiple
machines.
8 Move the cursor to the REC column, then press [ENTER] to select one REC
machine from Machines A-H.
The REC machine selected here will be used to specify a REC machine via the ESAM com-
mand. You cannot specify multiple REC machines.
Note:
These settings are effective only when the DM1000 receives Machine commands. If the
DM1000 receives Source commands that control individual channels, the settings will be
ignored.
Summary of Contents for DM 1000
