![background image](http://html.mh-extra.com/html/yamaha/dm-1000/dm-1000_owners-manual_896461278.webp)
278
Chapter 20—Other Functions
DM1000 Version 2—Owner’s Manual
At this time, the trigger signal is output from the CONTROL port when you operate the
assigned parameters or controls.
■
Parameters available in the INPUT section
•
TALKBACK/DIMMER
.......................Same as the MONITOR [TALKBACK] and
[DIMMER] button functions.
•
BUS/SLOT
............................................Same as the MONITOR [BUS] and [SLOT] but-
ton functions.
•
STEREO/2TRD1/2TRD2
....................Same as the MONITOR [STEREO], [2TRD1],
and [2TRD2] button functions.
Tip:
Refer to the next page for a complete list of assignable parameters and controls.
No Assign
AUX1 ON
TALKBACK
:
DIMMER
AUX8 ON
BUS
ST ON
SLOT
CH1 ON UNLATCH
STEREO
:
2TRD1
CH48 ON UNLATCH
2TRD2
BUS1 ON UNLATCH
TALKBACK UNLATCH
:
DIMMER UNLATCH
BUS8 ON UNLATCH
BUS UNLATCH
AUX1 ON UNLATCH
SLOT UNLATCH
:
STEREO UNLATCH
AUX8 ON UNLATCH
2TRD1 UNLATCH
ST ON UNLATCH
2TRD2 UNLATCH
UDEF1
CH1 ON
:
:
UDEF12
CH48 ON
BUS1 ON
:
BUS8 ON
Trigger signal polarity =
Output signals from
the CONTROL port
Trigger signal polarity =
Output signals from
the CONTROL port
Summary of Contents for DM 1000
