Yamaha CS1D, Owner'S Manual

Page: 144 / 617

85
Chapter 6. Insert and direct out
This chapter explains how external devices such as effect processors can be inserted into a specific channel, and how the
signal of an input channel can be directly output from a desired output jack.
Insert
An external device such as an effect processor can be inserted in an input channel/output channel of the PM1D system.
Connecting the external device to be inserted
To insert an external device into a specific channel, you will use the output jack and input jack of an output unit as the
insert out/insert in jacks respectively.
The following diagram shows typical connections for insertion.
•
Example connections for insertion 1
•
Example connections for insertion 2
If an external digital device is inserted via a digital
I/O card as shown in “Example connections for
insertion
2 ,” the word clocks of the PM1D system
and the digital device must be synchronized. Nor-
mally, we recommend that you set the digital device
as the slave, so that it will synchronize to the word
clock of the PM1D. (For details on setting it to slave
mode, refer to the manual for your device.)
1 2 3 4 5 6 7
OUTPUT UNIT NO.
INPUT SELECTOR
A
B
POWER
ON/ OFF
8
ANALOG OUTPUT BOX
INPUT UNIT NO.
PHANTOM MASTER
ON
OFF
+48V
POWER
ON/ OFF
1 2 3 4 5 6 7 8
ANALOG INPUT BOX
88
R L
Effect processor
DA card
LMY4-DA
AD card
LMY4-AD
AI8 analog input unit
AO8 analog output unit
DIGITAL I/O CARD MODEL MY8-TD
OUT
IN
I/O UNIT ID
PORT B SELECTOR
5-8
1-4
POWER
ON/ OFF
88
DIGITAL
OUT DIGITAL
IN
Effect processor
Digital I/O card
DIO8 digital input/output
unit