Yamaha AW4416 Operation Manual Download Page 408

Page: 408 / 507

AUTOMIX screen

120

— Reference Guide

AUTOMIX

OVERWRITE

EDIT OUT

UNDO button

CLR. BUF (clear buffer) button

AUTOMIX TRANSPORT

These are the same functions as described in the
Main page. Refer to the explanation on page
115.

■

Additional functions in the Mem-
ory page

In the Memory page you can press the [SHIFT] key
to assign the following functions to the [F1]–[F3]
keys.

• [F1] (TITLE EDIT) key

Use this to edit the name (memory title) of auto-
mix data saved in memory. This is the same
function as the

TITLE EDIT button.

• [F2] (RECALL) key

Recall the automix that is currently selected by
the cursor in the list. This is the same function as
the

RECALL button.

• [F3] (STORE) key

Store the current automix data. This is the same
function as the

STORE button.

Summary of Contents for AW4416




























































































































































































































































































































































































































































































































Search results

Summary of Contents for AW4416

Reviews:

Related manuals for AW4416

Brands by name

Popular brands

Yamaha AW4416, Operation Manual

Search results

Summary of Contents for AW4416

Reviews:

Related manuals for AW4416

Brands by name

Popular brands