Yamaha AW4416, Operation Manual

Page: 310 / 507

SET UP screen
22
— Reference Guide
Monitor page
Monitor the digital input signals
[Function]
Monitor the state of the digital audio sig-
nals being input from the DIGITAL STE-
REO IN jack or from digital I/O cards
installed in the OPTION I/O slots.
[Key operation]
• [SETUP] key
→
[F5] (Monitor) key
(*1)
• Repeatedly press the [SETUP] key until
the screen shown at the right appears.
*1. In the SET UP screen, the tabs dis-
played at the bottom of the screen are
divided into two groups. If the Monitor
tab is not assigned to the [F5] key
when you press the [SETUP] key, press
the [SHIFT] key + [F1] (CHANGE TAB)
key to switch the tabs.
[Mouse operation]
M button
→
SETU button
→
Monitor tab
[Screen functions]
A
CHANNEL STATUS MONITOR
This area monitors the state of the digital input
signals from the DIGITAL STEREO IN jack (DIG-
ITAL ST IN) or from a digital I/O card installed
in an OPTION I/O slot (OPTION INPUTS). The
following items are displayed.
●
Fs
This shows the sampling frequency of the input
signal.
●
EMPHASIS
This shows whether the input signal has been
processed by emphasis.
2
1
Display Meaning
44.1k
44.1 kHz sampling fre-
quency
48k 48 kHz sampling frequency
None
Unknown sampling fre-
quency
UNLOCK
No signal being input, or
invalid signal being input
Display Meaning
ON Emphasis on
OFF Emphasis off
??? Unknown