Yamaha AW4416, Operation Manual

Page: 326 / 507

UTILITY screen
38
— Reference Guide
●
TYPE 2
This backup method allows new backup data to
be added to media on which data was previ-
ously backed up. It is not possible to backup
data that extends across multiple volumes of
media. Before you can use this method to
backup on previously-unused media, you must
format the media manually.
Tip!
For details on the procedure for backing up
songs, refer to Operation Guide “Chapter 16.
Backing up and restoring songs.”
F
MASTERING MODE
Use the following two buttons to select the writ-
ing mode that will be used when you execute
the Mastering function.
●
TEST button
If this button is on, a test will be performed
before writing data to the CD-R/RW media to
see whether writing errors will occur. (Default=
off)
●
WRITE button
This turns data writing on/off. If the TEST button
= on and the WRITE button = off, only the writ-
ing test will be executed. (Default= on)
G
CD BACKUP MODE
Use the following three buttons to select the
writing mode when backing up songs to CD-R/
RW media.
●
TEST/WRITE buttons
These are the same functions as the MASTER-
ING MODE
6
TEST/WRITE buttons.
●
COMPARE button
When this button is on, the backup source song
data on the internal hard disk will be compared
with the backup destination data on the CD-R/
RW media after the data has been written. If for
some reason the backup was not written cor-
rectly, an error message will be displayed when
Compare is executed.