Yamaha AW4416, Operation Manual

Page: 334 / 507

VIEW screen
46
— Reference Guide
●
SEND
When the EXTERNAL button is on, move the
cursor to this area and rotate the [DATA/JOG]
dial to select one of the following jacks for use
as the insert send jack.
•
OMNI 1–4 ..........OMNI OUT 1–4 jacks
• SL1-1–SL1-8 ........Output channels 1–8 of
OPTION I/O slot 1
• SL2-1–SL2-8 ........Output channels 1–8 of
OPTION I/O slot 2
• D STO L/R ..........L/R channels of the DIGI-
TAL STEREO OUT jack
• STOUT L/R .........L/R channels of the STEREO
OUT jack
Tip!
If you select D STO or STOUT, only the L
channel can be selected for odd-numbered
channels, and only the R channel can be
selected for even-numbered channels.
● RTN.
When the EXTERNAL button is on, move the
cursor to this area and rotate the [DATA/JOG]
dial to select one of the following jacks for use
as the insert return jack.
•
AD1–AD8 ...........INPUT 1–8 jacks
• SL1-1–SL1-8 ........Input channels 1–8 of
OPTION I/O slot 1
• SL2-1–SL2-8 ........Input channels 1–8 of
OPTION I/O slot 2
• D STIN L/R .........L/R channels of the DIGI-
TAL STEREO IN jack
Tip!
• When the INT.EFF 1 or INT.EFF 2 button is
on, the input and output of internal effect 1/
2 will automatically be assigned to the insert
send/return of that channel. This assignment
cannot be changed.
• For the procedure of inserting an external
effect into a channel, refer to Operation
Guide “Chapter 8. Patching.”
• For the procedure of inserting an internal
effect into a channel, refer to Operation
Guide “Chapter 10. Internal effects.”
M
Fader
This shows the current fader location both
graphically and numerically. The setting can
also be edited in this page.
You can also move the cursor to the fader and
rotate the [DATA/JOG] dial to modify the fader
setting.
N
AUX
This shows the send level and pre/post selection
for AUX buses 1–8. These settings can also be
edited in this page. The heart symbol indicates
AUX buses that are paired.
O
ON/OFF
This switches the channel on/off.
■
Additional functions in the CH
View page
In the CH View page you can press the [SHIFT] key
to assign the following additional functions to the
[F1]–[F5] keys.
• [F1] (EQ ON/OFF) keys
Switch EQ on/off. This is the same function as
the ON/OFF button of
3 EQ.
• [F2] (DYN ON/OFF) key
Switch the dynamics processor on/off. This is
the same function as the ON/OFF button of
4
DYNAMICS.
• [F3] (ROUT OFF) key
Turn off all signals sent from that channel to
AUX buses 1–8.
• [F4] (PAN CENTER) key
Set the pan to center.
• [F5] (EFF. INS ASGN) key
This button is used to insert an external effect or
internal effect into a channel. This is the same
function as the
L ASSIGN button.
F1 F2 F3 F4 F5