36
ACD1
** Diag Mode **
Total Result [ ]
00 RESERVE-ACD1
* 01 SRAM
02 BATTERY
03 MAC ADDRESS
04 GPI
05 FAULT
06 RS485 SHEET
07 RS485 ALL
09 RTC
10 LCD
11 SW
12 D-SUB(32)
13 D-SUB(33)
14 D-SUB(34)
15 D-SUB(35)
16 D-SUB(36)
17 D-SUB(37)
18 D-SUB(38)
19 D-SUB(39)
20 ==> Category Menu
[Example of testing item selection list screen]
NO.
Test item
Contents of tests
Judgment
01
SRAM
Check the address bus and data bus.
Auto
02
BATTERY
Check the voltage of the back-up battery.
Auto
03
MAC ADDRESS
Automatically checks if the
fi
rst three digits are "00.A0.DE".
Auto
04
GPI
LoopBack test using jigs.
Auto
05
FAULT
LoopBack test using jigs.
Auto
06
RS485 SHEET (Circuit board test)
LoopBack test in circuit board.
Auto
07
RS485 ALL (General test)
LoopBack test using jigs.
Auto
09
RTC
Initializes and displays real time clock.
Semi-auto
10
LCD
Check the back light. Check if there is no missing LCD dots as well.
Visual check
11
SWITCH
Check the keys.
Visual check
12
D-SUB (32)
LoopBack test using jigs. (1 port only)
Auto
13
D-SUB (33)
LoopBack test using jigs. (1 port only)
Auto
14
D-SUB (34)
LoopBack test using jigs. (1 port only)
Auto
15
D-SUB (35)
LoopBack test using jigs. (1 port only)
Auto
16
D-SUB (36)
LoopBack test using jigs. (1 port only)
Auto
17
D-SUB (37)
LoopBack test using jigs. (1 port only)
Auto
18
D-SUB (38)
LoopBack test using jigs. (1 port only)
Auto
19
D-SUB (39)
LoopBack test using jigs. (1 port only)
Auto
[Testing item selection list]
[OK] will be shown in the Total Result
fi
eld if result of all the test items are OK while [NG] will be shown if result of any test
item is NG when all the checking in the category is over.
