ACD1
72
8. Confi rming the writing
The following procedure allows version check only.
• Click on the [Con
fi
rm] button.
• If “V*.** or R*.**” is shown for the group version, the writing is
fi
nished successfully. Check that the version is identical to the
group version. [Time required to indicate the completion message: about 12 seconds]
The “V*.** or R*.**” shows the group version, as “V1.10” in the [Example of Writing con
fi
rmation completion screen] in the
fi
gure below. If “Error!!” is shown, it indicates that the boot/program/component data is not written successfully. In that case,write
the data again.
9. After
confi rming the writing
Restarting will not take place automatically after writing data unlike boot/program updating. Turn off the power manually and then
restart if you want to start in the normal mode.
[Example of Writing Confi rmation Completion Screen]
