ACD1
68
8. Confi rmation of the component writing
• Click on the [Con
fi
rm] button.
• If “V*.** or R*.**” is shown for the component group version, the writing is
fi
nished successfully. Check that the version is
identical to the program version. [Time required to indicate the completion message: about 2 seconds]
The “V*.** or R*.**” shows the component version, as “V1.10” in the [Example of Writing con
fi
rmation completion screen] in the
fi
gure below. If “Error!!” is shown, it indicates that the component data is not written successfully. Write the component data again.
9. After
confi rming the component writing
Restarting will not take place automatically after writing component data unlike boot/program updating. Turn off the power
manually and then restart if you want to start in the normal mode.
[Example of Writing Confi rmation Completion Screen]
