Yamaha 2005 MT-01, Service Manual

Page: 46 / 435

TIGHTENING TORQUES
2-20
Stopper lever bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Generator and starter clutch:
Oil pipe 2 bolt M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
Generator cover bolt M6 11 10 Nm (1.0 m·kg, 7.2 ft·lb)
Stator coil assembly lead holder
screw
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Stator coil assembly screw M6 3 10 Nm (1.0 m·kg, 7.2 ft·lb)
Generator rotor bolt M12 1 80 Nm (8.0 m·kg, 58 ft·lb)
Starter clutch bolt M8 6 24 Nm (2.4 m·kg, 17 ft·lb)
Crankcase:
Crankcase stud bolt M12 8 See NOTE.
Crankcase stud bolt M10 4 See NOTE.
Speed sensor bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil filter cartridge M20 1 17 Nm (1.7 m·kg, 12 ft·lb)
Oil filter cartridge bracket bolt M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil filter cartridge union bolt M20 1 30 Nm (3.0 m·kg, 22 ft·lb)
Generator shaft end cover bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil delivery pipe 2/oil pump
driven gear stopper bolt
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil pump driven gear stopper bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Generator shaft bolt M8 1 28 Nm (2.8 m·kg, 20 ft·lb)
Crankcase bolt M8 3 24 Nm (2.4 m·kg, 17 ft·lb)
Crankcase bolt M6 18 10 Nm (1.0 m·kg, 7.2 ft·lb)
Engine oil drain bolt (crankcase) M14 1 43 Nm (4.3 m·kg, 31 ft·lb)
Engine oil filler plug M20 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil baffle plate bolt M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
Main axle bearing retainer bolt M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Drive axle bearing retainer screw M6 2 12 Nm (1.2 m·kg, 8.7 ft·lb)
Shift drum segment bolt M6 1 12 Nm (1.2 m·kg, 8.7 ft·lb)
Oil pump:
Oil strainer bolt (crankcase) M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil pump bolt M6 3 10 Nm (1.0 m·kg, 7.2 ft·lb)
Oil pump housing cover 2 screw M4 2 4 Nm (0.4 m·kg, 2.9 ft·lb)
Oil pump housing cover 1 screw M4 2 4 Nm (0.4 m·kg, 2.9 ft·lb)
Spring retainer bolt M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT
LT
E
LT
LT
LT
LT
LT
LT
LT