21
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
03: Effect-A
04: Effect-B
05: Controller
On the Controller screen, you can assign a function to each controller for the current Part. When set
to “off”, the controller will perform only its standard function.
Parameter name
Description
Ctg
(Effect Category)
Type
(Effect Type)
These parameters can be used to select a category and a type for Insertion
Effects A and B.
Settings:
Refer to the
Data List
(pdf) for a full list of the categories and types that can
be selected.
NOTE
Each effect type is described in detail in the
Synthesizer Parameter Manual
(pdf).
Preset
(Effect Preset)
This parameter can be used to select one of the current effect type’s
presets, which configure all parameters to suit a particular need. A full list of
presets for each effect type can be found in the
Data List
(pdf).
Effect parameters
The parameters available for editing will depend on the currently selected
effect type. A full list of parameters for each effect type can be found in the
Data List
(pdf).
NOTE
Each effect parameter is described in detail in the
Synthesizer Parameter
Manual
(pdf).
Parameter name
Description
PB
(Controller Destination:
Pitch Bend Wheel)
This parameter can be used to assign control of a parameter from Insertion
Effect A or B to the pitch bend wheel.
Settings:
off, EffA(+), EffA(-), EffB(+), and EffB(-)
off:
None of the above functions is assigned.
EffA(+) or EffB(+):
The more the finger slot in the middle of the wheel is pushed away
from you, the greater the effect on the assigned parameter and vice-versa.
EffA(-) or EffB(-):
The more the finger slot in the middle of the wheel is pulled towards
you, the greater the effect on the assigned parameter and vice-versa.
MW
(Controller Destination:
Modulation Wheel)
This parameter can be used to assign control of a parameter from Insertion
Effect A or B to the modulation wheel.
Settings:
off, EffA(+), EffA(-), EffB(+), and EffB(-)
off:
None of the above functions is assigned.
EffA(+) or EffB(+):
The more the finger slot at the front of the wheel is pushed away
from you, the greater the effect on the assigned parameter and vice-versa.
EffA(-) or EffB(-):
The more the finger slot at the front of the wheel is pulled towards
you, the greater the effect on the assigned parameter and vice-versa.
FS
(Controller Destination:
Foot Switch)
This parameter can be used to assign on/off control of Insertion Effect A or B
to an FC4A or FC5 Foot Switch (sold separately).
Settings:
off, EffA, and EffB
off:
Neither of the above functions is assigned.
EffA:
The foot switch will turn Insertion Effect A on and off.
EffB:
The foot switch will turn Insertion Effect B on and off.
CP4 STAGE:
FC1
(Controller Destination:
Foot Controller 1)
FC2
(Controller Destination:
Foot Controller 2)
CP40 STAGE:
FC
(Controller Destination:
Foot Controller)
These parameters can be used to assign control of a parameter from
Insertion Effect A or B or control of the current Voice’s volume to an FC7 Foot
Controller (sold separately).
Settings:
off, EffA(+), EffA(-), EffB(+), EffB(-), and volume
off:
None of the above functions is assigned.
EffA(+) or EffB(+):
The more the controller is operated, the greater the effect on the
assigned parameter.
EffA(-) or EffB(-):
The more the controller is operated, the smaller the effect on the
assigned parameter.
volume:
The foot controller can be used to adjust the current Voice’s volume.