39
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Utility Area
The Utility area is used to make settings that affect the entire instrument.
NOTE
The Utility menu is the first screen displayed when the [UTILITY] button is pressed.
NOTE
For details concerning
07: Job
, refer to the description of the Utility Job area (
The following screenshots illustrate how, for example, to set parameters from the General screen.
Parameter type selected in Step 2:
Parameter setting screen from Step 3:
1
UTILITY
This shows that you are on the Utility menu.
2
Menu item
The items available for selection from the Utility menu are shown here. Select the required item (
01
to
06
) using the [
d
] and [
u
] buttons, and then press the [ENTER] button to display the setting
screen for the corresponding parameters.
3
Selected screen
The name of the current screen is shown here.
4
Parameter
The parameters available for setting are shown in the top row of text. The current setting (
5
) for
each is displayed underneath. In addition, the parameter currently being set is indicated by the
cursor (
R
) to its left (
6
). If necessary, use the [
l
] and [
r
] buttons to move the cursor and select a
different parameter to set.
5
Setting
Parameter settings are shown in the bottom row of text. Use the [-1/NO] and [+1/YES] buttons or the
Data Dial to change a setting. Note that the cursor (
6
) must first be moved to the parameter to be
set.
6
Cursor (
R
)
The flashing cursor indicates the parameter currently selected for editing.
7
More symbol
This symbol indicates that the current Utility area screen is split over multiple panes, one of which is
being shown. In this case, you can move to the next pane by pressing the [
d
] button.
8
Edit symbol (
E
)
This symbol is displayed when the instrument’s settings have been modified but not yet stored.
Press the [STORE] button to store the modified settings.
Procedure
1. Press the [UTILITY] button.
2. On the Utility menu, use the [
d
] and [
u
] buttons to select the type of parameter you wish to
set (
01
to
06
), and then press the [ENTER] button.
3. Make the required changes to parameter settings on the corresponding screen.
UTILITY
D
01:General
E
1
2
Press the [ENTER] button.
UTILITY
Ma
General
+ 0.
sterTune Trnsps
E
0/440
.
0Hz
R
+ 0
D
8
4
6
7
3
5