35
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
“Performance” selected as load type:
The following screenshots illustrate a typical example of Performance loading.
02: Load
selected in Step 2:
File and load type selected in Step 3:
Selection of the Performance to be loaded:
Selection of a destination for the Performance to be loaded:
Confirmation popup
1
to
4
See the above descriptions from
“All” or “All without Sys” selected as load type.
5
Src Performance (source Performance)
This parameter is used to set the Performance to be loaded. Use the [-1/NO] and [+1/YES] buttons
or the Data Dial to select a Performance, and then press the [ENTER] button.
6
Dst Performance (destination Performance)
This parameter is used to set a destination for the Performance to be loaded. Use the [-1/NO] and
[+1/YES] buttons or the Data Dial to select a Performance, and then press the [ENTER] button.
7
Are you sure?
This message is displayed before executing the Load function. Press the [+1/YES] button to load
the selected Performance. Alternatively, press the [-1/NO] button to return to the previous screen.
To cancel loading, press the [EXIT] button while the “Now loading...” message is displayed.
FILE
W
02:Load
Press the [ENTER] button.
FILE
Load
R
P
e
Type
File
rformance
STAGE̲01
1
3
4
2
Press the [ENTER] button.
FILE
Load
R
Src Performance
001(A01):CFX Grand
5
Press the [ENTER] button.
FILE
Load
R
Dst Performance
050(A03):71Rd
6
Press the [ENTER] button.
Are you
[NO]
sure?
/[YES]
7