16
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Part Edit Area
NOTE
On the CP40 STAGE, the same Part is selected by pressing either the [LAYER] or [SPLIT] button with the
[PART SELECT] button held down.
NOTE
The Edit menu is the first screen displayed when the [EDIT] button is pressed.
The following screenshots illustrate how, for example, to edit parameters on the Play Mode screen.
02: Part
selected in Step 4:
Parameter type selected in Step 5:
Parameter setting screen from Step 6:
1
EDIT Part: (Current Part)
This shows that you are on the Part Edit menu. The name of the Part selected for editing is shown
after the colon (:).
CP4 STAGE:
MAIN, LAYER, or SPLIT
CP40 STAGE:
MAIN or SP/LA
2
More symbol
This symbol indicates that other menu items are available for selection. In this case, the next one
can be displayed by pressing the [
d
] button.
3
Menu item
The items available for selection from the Part Edit menu are shown here. Select the required item
(
01
to
06
) using the [
d
] and [
u
] buttons, and then press the [ENTER] button to display the editing
screen for the corresponding parameters.
4
Selected screen
The name of the current screen is shown here.
Procedure
1. Turn on the Part you wish to edit using the corresponding button.
2. Hold down the [PART SELECT] button and press the Part button from Step 1 once again to
select the Part for editing.
3. Press the [EDIT] button.
4. On the Edit menu, use the [
d
] and [
u
] buttons to select
02: Part
, and then press the [ENTER]
button.
5. Using the [
d
] and [
u
] buttons, select the type of parameter you wish to edit (
01
to
06
), and
then press the [ENTER] button.
6. Make the required changes to parameter settings on the corresponding screen.
EDIT
W
02:Part
E
Press the [ENTER] button.
EDIT Part:MAIN
D
01:Play Mode
E
1
2
3
Press the [ENTER] button.
Part:MAIN
Volume
Play Mode
115
Pan
Gain
E
R20
R
100
D
8
7
9
4
6
5