48
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Utility Job Area
Utility Job functions
Two functions can be executed from the Utility Job area — Factory Set and Version.
01: Factory Set
The Factory Set function can be used to restore the stage piano’s User Memory to its default
condition.
NOTE
The Utility menu is the first screen displayed when the [UTILITY] button is pressed.
NOTE
Before executing this function, the instrument will display the Confirmation popup to confirm that you
wish to proceed (“Are you sure?”). You can press the [+1/YES] button to execute the function or the [-1/
NO] button to return to the previous screen without doing so.
NOTICE
Whenever the Factory Set function is used to restore default settings, all Performance data and Utility
settings stored in the stage piano’s User Memory will be overwritten. Be sure, therefore, to save all
important data and settings on a USB flash-memory device in advance.
07: Job
selected in Step 2:
01: FactorySet
selected in Step 3:
PowerOn Auto
set to “off” in Step 4:
Confirmation popup from Step 5:
1
Job FactorySet
This shows that you are on the Utility area’s Factory Set screen.
2
PowerOn Auto
This parameter is used to enable (“on”) or disable (“off”) automatic restoration of User Memory to its
default condition whenever the stage piano is turned on. Use the [-1/NO] and [+1/YES] buttons or
the Data Dial to select “on” or “off” as required. Normally,
PowerOn Auto
should be set to “off”. In
addition, this parameter’s setting is automatically stored when the Factory Set function is executed.
Procedure
1. Press the [UTILITY] button.
2. On the Utility menu, use the [
d
] button to select
07: Job
, and then press the [ENTER] button.
3. Use the [
u
] button to select
01: FactorySet
, and then press the [ENTER] button.
4. Use the [-1/NO] and [+1/YES] buttons or the Data Dial to set
PowerOn Auto
to “off”, and then
press the [ENTER] button.
5. When the Confirmation popup is displayed, press the [+1/YES] button to execute the Factory
Set function.
UTILITY
U
07:Job
Press the [ENTER] button.
UTILITY Job
D
01:FactorySet
Press the [ENTER] button.
Job
FactorySet
PowerOn Auto
R
off
1
2
Press the [ENTER] button.
Are you
[NO]
sure?
/[YES]
3