![background image](http://html.mh-extra.com/html/yahama/cp4-stage/cp4-stage_reference-manual_893572024.webp)
24
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
6
More symbol
This symbol indicates that the current editing screen is split over multiple panes, one of which is
being shown. In this case, you can move to the previous or next pane by pressing the [
d
] or [
u
]
button.
7
Edit symbol (
E
)
This symbol is displayed when the current Performance has been edited but not yet stored. All edits
made to the Performance can be stored using the Store Performance function (
).
Zone parameters
NOTE
With the exception of
MasterKbdSw
, each of the parameters in the following table can be set
individually for Zones 1 to 4 on the corresponding pane.
Parameter name
Description
MasterKbdSw
(Master Keyboard
Switch)
This parameter can be used to enable (“on”) or disable (“off”) your CP4
STAGE or CP40 STAGE as a master keyboard. As indicated by
Common
at
the left of the screen, the
MasterKbdSw
setting applies to all four zones.
Settings:
off and on
ZoneSw
(Zone Switch)
This parameter can be used to enable (“on”) or disable (“off”) the currently
selected zone.
Settings:
off and on
Channel
This parameter can be used to set a MIDI send channel for the currently
selected zone.
Settings:
1 to 16
Octave
(Transpose Octave)
This parameter can be used to shift the pitch of the currently selected zone
upward or downward in units of one octave.
Settings:
-3 to +0 to +3
Trnsps
(Transpose Semitone)
This parameter can be used to shift the pitch of the currently selected zone
upward or downward in units of one semitone.
Settings:
-11 to +0 to +11
NoteLimit
Low
(Low Note Limit)
High
(High Note Limit)
These parameters can be used to define keyboard sections for each zone.
Low Note Limit
defines the lowest key in the currently selected zone;
High
Note Limit
defines the highest. All keys within this range will produce a note
for the currently selected zone. Use the [-1/NO] and [+1/YES] buttons or the
Data Dial to change the settings for these parameters. You can also press a
key while holding down the [SHIFT] button to set it directly.
Settings:
C-2 to G8
BankMSB
(MIDI Bank MSB)
This parameter can be used to set the Bank Select MSB to be sent as a
MIDI message from the currently selected zone to the corresponding
external instrument upon selection of the Performance. Use the [-1/NO] and
[+1/YES] buttons or the Data Dial to change the setting.
Settings:
000 to 127
BankLSB
(MIDI Bank LSB)
This parameter can be used to set the Bank Select LSB to be sent as a MIDI
message from the currently selected zone to the corresponding external
instrument upon selection of the Performance. Use the [-1/NO] and
[+1/YES] buttons or the Data Dial to change the setting.
Settings:
000 to 127
PgmNo
(MIDI Program Change
Number)
This parameter can be used to set the Program Change Number to be sent
as a MIDI message from the currently selected zone to the corresponding
external instrument upon selection of the Performance. Use the [-1/NO] and
[+1/YES] buttons or the Data Dial to change the setting.
Settings:
1 to 128
Volume
(MIDI Volume)
This parameter can be used to set the volume of the external instrument
corresponding to the currently selected zone upon selection of the
Performance.
Settings:
0 to 127