34
CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
“All” or “All without Sys” selected as load type:
The following screenshots illustrate how, for example, data can be loaded using the “All” load type.
02: Load
selected in Step 2:
File and load type selected in Step 3:
Confirmation popup
1
Load
This shows that you are on the Load screen.
2
Cursor (
R
)
The flashing cursor indicates the parameter currently selected for editing.
3
File
This parameter is used to select the file to be loaded. Only
All
-type files located in the USB flash-
memory device’s root directory can be selected here. If necessary, move the flashing cursor (
2
) to
the setting underneath
File
using the [
r
] button. Then, use the [-1/NO] and [+1/YES] buttons or the
Data Dial to select the required file.
4
Type
This parameter is used to specify a load type — that is, which data from the selected file (
3
) to load
into the instrument. Move the flashing cursor (
2
) to the setting underneath
Type
using the [
l
]
button, and then use the [-1/NO] and [+1/YES] buttons or the Data Dial to specify the load type.
5
Are you sure?
This message is displayed before executing the Load function. Press the [+1/YES] button to load
the selected data. Alternatively, press the [-1/NO] button to return to the previous screen. To cancel
loading, press the [EXIT] button while the “Now loading...” message is displayed.
FILE
W
02:Load
Press the [ENTER] button.
FILE
Load
R
Type
File
All
STAGE̲01
1
3
4
2
Press the [ENTER] button.
Are you
[NO]
sure?
/[YES]
5