3408/3410/3412 Series Industrial PC System Manual
14
Feature
Description
Display
The 3408T ships with a 7.7-inch STN passive color LCD flat-panel display with
an impact-resistant shield.
The 3410T ships with a 10.4-inch TFT active matrix color LCD flat-panel.
IR (Infrared) Port
The IR port transceiver is located behind this window. The port is IrDA and
ASKIR compliant, allowing you to connect the unit to any IrDA-compatible de-
vice. You must load special software (not included) to use this feature. When
enabled through the BIOS Setup menu, the IR link is designed to operate at a
distance of 0 to 1 meter.
Note: COM2 is not available for other use when you
select the IR port in the BIOS Setup menus.
Diagnostic LEDs
Power
On (green) when there is power to the unit.
Disk
On (green) when the computer module is accessing the disk drive.
COM
On (green) when there is communication on one of the computer
module’s serial ports, including communication between the computer
module and the touchscreen (if attached to COM2) or a serial mouse.
Input
On (green) when the unit has a touchscreen. This LED gets brighter
when it detects a touch input.
Contrast Control Keys
These two keys control the contrast. The left key decreases contrast; the right
key increases contrast.
Note: You cannot manually adjust contrast on
3410/12T units with TFT active color flat-panel displays; contrast is adjusted
automatically on these units.
3408KP Front Panel
Figure 3-2. 3408KP Front Panel
