9
1.
Attach optional equipment following the instructions in Chapter 3.
2.
Attach the power cord from the power receptacle to a properly grounded 90-250
VAC, 50-60 Hz outlet. (See Chapter 3,
Creating a Power Cable
.)
3.
Turn on power to the unit. The system will boot up into the operating system.
4.
On the 3408 unit, adjust the contrast by using the contrast keys on the front panel.
On the 3408KP unit, adjust the contrast by pressing and holding the “F/A” key, and
then pressing the left or right arrow key to increase or decrease contrast.
Note
You cannot manually adjust contrast on 3410/12 units with active color
flat-panel displays; the contrast is adjusted automatically.
5.
Install application software via the external floppy, the network, or the IR port.
