35
C:\VGA\C&T550\WIN95
C:\VGA\C&T550\WINNT
C:\VGA\C&T550\WINCE
C:\VGA\C&T\DOS\UTILITIES
The appropriate drivers are copied to the hard drive under C:\VIDDRV for systems with
Windows 95 or Windows NT installed.
Using a Touchscreen
Xycom Automation’s touchscreen complies with environmental specifications and
maintains a NEMA 4 seal when panel mounted. It remains operational even after 30 mil-
lion touches.
Note
These touchscreen instructions do not apply to units with the Windows
CE operating system. To calibrate the touchscreen, refer to the Quick-
start guide for your Windows CE workstation.
Installing Touchscreen Drivers
Depending upon the date of purchase, the Xycom Automation unit will have one of two
possible touchscreen controllers:
•
The Microtouch Controller P/N 114084
•
The Xycom Controller
P/N 140554
These controllers function similarly. However, the following sections require attention to
the type of controller installed.
Microtouch Controller
If a touchscreen is factory installed, you will receive a disk with MS-DOS
and Windows 95 touchscreen drivers. If Windows 95 is preinstalled on
your system with a touchscreen, the touchscreen driver has already been
installed. If you ordered the Windows NT option, a copy of the driver is
provided on disk, as well as on the hard drive (c:\touchdrv). You must pur-
chase touchscreen drivers for OS/2 (3408-DRVOS/2) separately.
The Windows 95 touchscreen driver supports the COM2 and mouse ports.
The Windows NT touchscreen driver
only
supports COM2.
If you change the operating system, you must install the corresponding
touchscreen driver software. Refer to the touchscreen manual for instruc-
tions.
