3408/3410/3412 Series Industrial PC System Manual
34
Note
An external CD-ROM drive may be required to load additional drivers
on Windows 95 and Windows NT-equipped systems.
Installing Ethernet Drivers
If Windows 95 or Windows NT 4.0 is pre-installed on your system, Ethernet drivers are
installed on your hard drive in the C:\netdrv directory.
Note
If you want to use Ethernet capabilities with Windows 95, your system
must have BIOS revision level 1.1 or higher.
If MS-DOS is installed on your system, the Ethernet drivers are supplied on your hard
drive in the C:\netdrv directory, but they are not installed.
To install the MS-DOS Ethernet drivers,
1.
At the C: prompt, type “cd netdrv”.
2.
Once the C:\netdrv path is specified, type “setup”.
3.
Follow the on-screen instructions to complete installation.
Note
If you install Windows NT 4.0 on your system, the Ethernet drivers that
are provided with Windows NT 4.0 do not work with the Ethernet con-
troller on 3408/3410 units. You must use the drivers provided by Xycom
Automation.
These drivers can be found on the Intel 558 Ethernet Drivers disk that
ships with your system. Refer to the Msnt40.txt file in the A:\Info\Ms di-
rectory on this disk for installation information.
Consult the Info directory on the drivers disk for additional installation information. If
Windows CE is on your system, you can not change the currently installed and config-
ured drivers.
Installing Video Drivers
Video drivers and the expansion utilities are on the disk included with the documentation
kit as well as on the hard drive.
The video drivers are in the following directories for systems with DOS: