3408/3410/3412 Series Industrial PC System Manual
12
Running the Tests
To run the tests, insert the diagnostics disk into drive A. Turn on the computer (the diag-
nostics program will boot-up). Figure 2 -2 illustrates the Main Menu.
Copyright 1990-1996, Xycom Automation, Inc. All rights reserved.
Diagnostic Tests Sequence/Selection Menu (Rel. xx)
1.
WILL pause on error
2.
SINGLE PASS test mode
3.
Save setup to file
4.
Extract setup from a file
5.
Auto-select tests
6.
Deselect all tests
7.
Quit and exit to DOS
8.
Return to previous screen
A)
RAM Test
B)
Video RAM Test
C)
Extended RAM Test
D)
Real Time Clock Test
E)
COM1 Serial Port Test
F)
COM2 Serial Port Test
G)
COM3 Serial Port Test
H)
COM4 Serial Port Test
I)
Math Coprocessor Test
J)
Video Adjustments Test
K)
Video Interface Test
L)
Speaker Port Test
M)
LPT1: Printer Port Test
N)
LPT2: Printer Port Test
O)
C: Hard Drive Interface Test
P)
D: Hard Drive Interface Test
Q)
A: Floppy Drive Interface Test
R)
B: Floppy Drive Interface Test
S)
Keyboard, Keypad Tests
≡
= Test Selected
[ENTER]=START TESTING
Use the letters to move the cursor and select/deselect, or use the arrow keys to move, then
use the [SPACE] key to select/deselect a test or function.
Figure 2-2. Main Menu
Note
Please read the DIAG.TXT file on the diagnostics disk for detailed in-
formation about the tests.
