Xtore NASolution NP1040 User Manual Download Page 45

Page: 45 / 186

NFP Storage Manager 1.1 User’s Manual

Chapter 4. Using NFP Storage Manager 1.1

the

User account

column (use Ctrl for multiple and Shift for continuous

selection), then click on

No access, Read Only

Writeable.

Please note, if this

NP1040

NAS server is added to the Windows

NT/2000 Domain, and (1) system administrator has previously added
certain Windows PDC user account to

Local account,

or (2) there is

an account in both

NP1040

NAS server and Windows PDC with the

same name, then the

User account

list on the left will not show the

account number in

NT Domain Users,

but only in

Local Users

prevent system administrator from confusion-caused repeated setup
of access rights for the same user.

Deleting User Privileges

To delete user or group privileges, use your mouse to select a user in
the

User privileges

column (use Ctrl for multiple and Shift for

continuous selection), then click

Remove

Summary of Contents for NASolution NP1040



























































































































































































Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands

Xtore NASolution NP1040, User Manual

Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands