Xtore NASolution NP1040 User Manual Download Page 158

Page: 158 / 186

NFP Storage Manager 1.1 User’s Manual

UNIX access to NP1040

153

complicated task. When the path of a NFS file system changes, or

a new NFS file system is added, the administrator has to change the

settings for each Unix client one by one.

Using NIS (Network Information Service) is one solution because NIS

saves all mount information in the NIS server. Once NFS clients join

the NIS domain, they will be able to use the shared directories on

NFS servers through the function of “automount” instead of modifying

/etc/vfstab or /etc/fstab individually. Most Unix systems (Solaris, Linux,

FreeBSD etc.) can be configured as an NIS server.

The following description is based on the settings on a Solaris NIS

server.

Master map is the database of the mount information on the NIS

server. Before building this database, administrators must edit the

pure text file /etc/auto_master as follows.

Master map: /etc/auto_master

#Directory

Map

Mount options

/net

-hosts

-rw

/home

auto_home

-nosuid

auto_direct

The first column in the file is the path to automount, which means that

when users at clients try to access this directory, the link will be

enabled automatically. In the second column, the parameters are the

paths for databases, which record the mount information about the

Summary of Contents for NASolution NP1040



























































































































































































Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands

Xtore NASolution NP1040, User Manual

Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands