Xtore NASolution NP1040 User Manual Download Page 107

Page: 107 / 186

NFP Storage Manager 1.1 User’s Manual

102

NFP

Backup Utility: Backing up and restoring data on the server

FAT/FAT32 does not support files larger than 4GB. When

running

NASolution

Network Filer Plus

on Win95/98 clients

with FAT/FAT32, or backing up files from

NP1040

NAS

server to another devices running Win95/98 with FAT/FAT32,

the system will automatically divide the backup file into

several 4GB-size files, and name the extension of each file in

the order of “.bkp”, “.001”, “.002”, etc. Please store these files

in the same directory. When restoring the data back onto

NP1040

NAS server in the future, system administrator only

needs to specify the “.bkp” file, and other related files will

also be restored automatically without manually restoring

every single file.

Restoring data back onto the server

Go to

NFP Backup Utility

, and click on the

Restore

button to

open the backup window.

Summary of Contents for NASolution NP1040



























































































































































































Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands

Xtore NASolution NP1040, User Manual

Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands