Xtore NASolution NP1040 User Manual Download Page 109

Page: 109 / 186

NFP Storage Manager 1.1 User’s Manual

104

NFP

Backup Utility: Backing up and restoring data on the server

as a reference by the system; if the names of the shared folders

are the same on both the

NP1040

NAS server and the intended

to be restored file “.bkp”, system will not skip this folder but

instead combine the data of both folders. The only exception: if

this folder is some user’s home folder, and the home folder on

NP1040

NAS server and the home folder of the “.bkp” file do not

belong to the same user, this home folder will be skipped as a

whole for security reasons and will not be combined by the

system

Click

Apply

to enter into another page to select restored

information.

Select what item(s) you want to restore.

Summary of Contents for NASolution NP1040



























































































































































































Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands

Xtore NASolution NP1040, User Manual

Search results

Summary of Contents for NASolution NP1040

Reviews:

Related manuals for NASolution NP1040

Brands by name

Popular brands