CPU: Intel Pentium 4 2.4GHz
Motherboard: ECS 848P-A
Graphic Card: ATI 9550 128MB,
Memory: 512MB
HDD: 120G (IDE)
Recommended resolution configuration for different channels:
Hybrid NDVR Board
Channels
Recommended
Resolution
Remark
64
CIF
Continuous recording is
not recommended
48
CIF
40
DCIF
CIF
32
DCIF
CIF
24
DCIF
CIF
Less or Equal to16
4CIF
DCIF
CIF
【
OSD Date
】
Select whether display the OSD date on the screen or not.
When you select
“Not”, the date will not display on the screen of corresponding
channel.
【
Masking Bitmap File
】
Watermark function ,the logo picture must be
edited ad 128*128 pixels file size and saved as bmp format.
【
Stream Type
】
Select whether program record audio data or not. This
setting is not available for IP Cameras, for stream type of IP Camera; you
should set it remotely in
IP Camera Setup
.
【
OSD Contrast
】
Set OSD displaying brightness & position. An
“auto”
item in OSD Contrast’s drop-down list will make OSD suit the background’s
color automatically.
【
Copy Setup to
】
Set other cameras with the same setup.
Notes:
1) If less than 64 cameras are used, many of them can
’t provide pictures
sometimes and an alarm will appear (beep to tell you some video
information is missing). Set the camera with no picture disabled and
the alarm will disappear. When you want to use them later, set as
enabled again;
2) The unit of the swap file should be MB. The range is from 2 to 50;
3) Set the position and contrast of the date shown on the screen.
Sometimes the date cannot be clearly seen for its color is similar with
