Press
button to open all playback windows in sequence according
to the order of the cameras.
Note:
If you press this button as soon as you enter the playback interface, all the
cameras will be played back from the beginning of this day when there is
record data. For example, there is record data from 8:00 AM to all cameras,
then, they will be played back from 8:00 AM. If you select a point of time on the
time bar and then press this button, then, all the cameras will be played back
from that time.
Press
button to close all playback windows.
Previous / Next Minute: press this two buttons to look previous or
next minute.
Next frame: press this button continuously to play video next frame,
the speed is determined by the following playing speed adjustment bar.
/
Play/Pause: This button will alternate between Play and Pause.
When it is playing, it will show
and press it to stop, and then the button will
show
. When you select reverse playing, it will show
to play by
pressing it.
Stop: press this button to stop playing.
Image zooms out. Press this button, Left-Single-Click an image;
quarter of the image will be enlarged. Right-Single-Click the image again, it will
resume the normal.
Adjust the voice: drag the bar to adjust the voice
and click the left button to clear the voice.
Adjust playing speed: drag the bar to adjust the
playing speed and click the left button to resume normal playing speed.
Note:
It is not suggested that multi-channel (more than 10 channels) record or
playback coinstantaneous unless your PC has an advanced configuration,
because the data throughput of HDD is huge in that case. Multi-channel search
in client and server are the same except their paths. In client, they are in local;
in remote search, it searches among the record data in server in the local
network.
