3.4
PTZ Control
Press
button to set PTZ.
In this screen, you can define the PTZ protocol and set the Preset Position
as well as the plan to execute them automatically.
【
Camera
】
Select the camera to be set from the drop-list.
【
Baud rate
】
Set baud rate according to PTZ protocol from the drop- list.
【
PTZ Protocol
】
Select the communication protocol for the PTZ camera
from drop-list.
【
Copy to
】
After finishing one channel, if you want to set any other
channels’ configuration as the same as this camera, you can select channel
number from drop-list, and press
button.
【
PTZ Address
】
Set the address of the decoder, which must be matched
with the value of dipswitch in the PTZ.
【
Speed
】
Set the speed of the PTZ.
【
Preset position & schedule setup
】
Define preset position and set time
to call preset position automatically. System can add and delete plan time.
