the available certain channels must be the first certain channels. If you disable
hard decoding, you
can’t output real-time video of IP camera to TV Wall.
【
Video Switch Interval(sec)
】
Set interval that each window shows
cameras circularly when there have more than one camera in it.
Note:
1. One camera is only shown in one window once. But you can show
one camera in 2 windows through switching the
main camera channel
and
sub camera channel
. Also, you can show several cameras in one
window after you set the “Video Switch Interval”.
2. MD card can only decode the data of 40 series card and some IP
cameras. When it is used to decode 42 series card or Mega IP
cameras, there will be no data output.
2.6.2
Matrix Setup for DG42xxHF cards
Our new series DG42xxHF cards support to output video from the card
itself to a TV monitor, the setup for this function is similar to the settings for NV
series Matrix cards.
【
Matrix Group
】
System operator can set groups of video images to be
sent out through the TV output port of DG42xxHF card, each group has
different display modes. Up to 16 groups you can set.
【
Video Out Port
】
Select the output port of DG42xxHF card that you want
to set, only one port is available for each DG42xxHF card
.
