64 / 99
www.xovis.com
3.2.10.4
Settings
The “Settings” box holds elements for all settings of the sensor.
Most of these settings are
part of the setup wizard and it is strongly recommended to setup a PC-Series sensor by
using the wizard (see chapter 3.2.7). However, users familiar with all the settings can change
them here. Beside those basic settings, the
“Settings” box
also allows to manage users,
plugins and data push configuration. The settings are divided into 7 sections which can be
displayed using the tab navigation:
Important: All changes made in the config view will first be applied to the sensor when
pressing the “Save” button (see chapter
3.2.10.1.1).
An “unsaved changes” reminder
pops-up as soon as any changes will be performed. It will disappear only after clicking on
the save button, by undoing any changes or by clicking the cross symbol on the upper right
side of the blue reminder box.
3.2.10.4.1.
Sensor
The “Sensor” section holds all parameters relevant to the counting / tracking functionality of
the sensor
as well as the sensor identification fields “Sensor name” and “Sensor group”
. All
these settings have already been described in chapter 3.2.7
“
Setup Wizard
”.
3.2.10.4.2.
Data Push
This section allows to manage the data push capability of the sensor. Using data push, the
sensor can automatically inform a remote point about count data, person coordinates,
sensor status or validation recordings. These data can be pushed using HTTP(S) and (S)FTP.
Summary of Contents for PC Series
Page 1: ...PC Series User manual...
