Xovis PC Series User Manual Download

Page: 15 / 99

15 / 99

www.xovis.com

Recommended browsers are Firefox, Chrome, Opera and Internet Explorer.

For all browsers JavaScript support needs to be enabled and all caching for this website
needs to be switched off!

3.2.5

Login to the sensor

The arrival page of the website shows a log-

in dialog. The default password is “pass”

(without the “”).

Figure 16: Login screen

The login screen holds a “Forgot your password” link. This allows to reset the sensor using

the Sensor Master Key (SMK). The reset procedure is described in chapter 3.2.10.4.5.

3.2.6

Navigation

The navigation bar is located at the top of the web GUI. It basically holds three sections: The
logo, the menu buttons and a context menu.

The menu buttons allow the user to switch between the four main views “Live”, “

Analytics

”,

“Config” and “Status”. The purpose of these views is described in their respective chapters

3.2.8 to 3.2.11. These buttons are disabled when logged out and in the setup wizard mode
(see next chapter).

Summary of Contents for PC Series




































































































Search results

Summary of Contents for PC Series

Reviews:

Related manuals for PC Series

Brands by name

Popular brands

Xovis PC Series, User Manual

Search results

Summary of Contents for PC Series

Reviews:

Related manuals for PC Series

Brands by name

Popular brands