30 / 99
www.xovis.com
Figure 29: A count zone
Editing a count zone is the same as with the floor masks.
The sensor supports up to 8 count zones. When the 8
th
zone is drawn, the zone drawing tool
gets disabled. One or more count zones then need to be deleted to re-enable the zone
drawing tool.
3.2.7.9.6.
Scene elements
All the scene elements described so far (floor masks, count lines, count zones) are listed in
the scene elements box:
Figure 30: Scene elements
When hovering over the elements within the list, the element gets hightlighted both within
the list and within the scene. When clicking on a specific element, it gets marked red both
within the list and within the scene. At the same time the selected element is brought to the
front of the scene view, allowing to modify it even if it was actually lying behind another
element (e.g. count line behind a count zone). Clicking again on the element or selecting
another element will unmark it again. The vice-versa procedure is also supprted, i.e.
hovering and selecting the scene elements within the scene view. Figure 31 shows an
example:
Summary of Contents for PC Series
Page 1: ...PC Series User manual...
