Xorcom XP0100, User Manual

Page: 64 / 71

XP0100 Enterprise IP Phone Using the Advanced Phone Functions
Xorcom Ltd. 57 www.xorcom.com
To configure Action URL via web user interface:
1)
Click on Phone -> Action URL .
2) Enter a HTTP URL in the proper field.
3) Click Confirm to save the change.
Note:
Action URL is allowed to be HTTPS URL. Contact with your system administrator
for more information.
The following table provides variables can be used in the Action URL:
Parameter Descriptions
$mac MAC Address of the phone
$ip IP Address of the phone
$model Device model name of the phone
$firmware Firmware version of the phone
$active_url SIP URI of the active user
$active_user User part of the SIP URI of the active user
$active_host Host part of the SIP URI of the active user
$local SIP URI of the caller
$remote SIP URI of the callee
$display_local Display name of the caller
$display_remote Display name of the callee
$call_id Call id
$duration Call duration
$callDirection Indication of the call as sender or recipient
Action URI
Opposite to Action URL, Action URI allows the phone to interact with web server
applications by receiving and handling HTTP GET requests. To simply verify this feature,
you can enter the following string into the browser address bar and press Enter:
http://192.168.10.5/cgi-bin/ConfigManApp.com?key=DNDOn
Then the phone with the IP Address of 192.168.10.5, if existed, will turn on DND.
Be aware that only predefined phone events are supported by the phone.
The following table provides the predefined phone events:
Phone Events Descriptions
key=OK
Press the
√
key
key=SPEAKER Press the Speaker key
key=F_TRANSFER Press the Transfer key
key=VOLUME_UP Increase the volume
key=VOLUME_DOWN Reduce the volume