XP0100 Enterprise IP Phone
Using the Advanced Phone Functions
Xorcom Ltd.
39
www.xorcom.com
accounts, Advance settings of Network, Reset to Factory, and other advance phone
settings
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web user interface.
The advanced settings of the phone such as Account, Reset to Factory, and
Advanced Settings via the phone interface.
The default administrator password is
admin
. Meanwhile the user name for Web user
interface access is
admin
.
To change the administrator password via phone user interface:
1)
Press
->
Settings
->
Advanced
.
2)
Enter the password required, scroll to
Set Password
and then press
.
3)
Enter the
Current PWD
,
New PWD
and
Confirm PWD
, press
abc
soft key to
change the input method.
4)
Press
to save the change or
to cancel.
To change the administrator password via web user interface:
1.
Click on
Security
.
2.
Select
admin
from the pull-down list of
User Type
, enter the
Current Password
,
New Password
and
Confirm password
.
3.
Click
Confirm
to save the change.
To change the user password, refer to the steps introduced above.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
To reboot the phone via web user interface:
1)
Click on
Phone
->
Upgrade
.
2)
Click
Reboot
to reboot the phone.
Note:
Please do not power off during reboot, or it will cause the flash memory error.
Summary of Contents for XP0100
Page 1: ...Xorcom Ltd www xorcom com XP0100 P IP PHONE USER MANUAL...
Page 3: ...Xorcom Ltd www xorcom com This page is intentionally left blank...
Page 7: ...XP0100 Enterprise IP Phone Table of Contents IV Trouble Shooting 63...
Page 69: ...XP0100 Enterprise IP Phone Using the Advanced Phone Functions Xorcom Ltd 62 www xorcom com...
