Xorcom XP0100, User Manual

Page: 22 / 71

XP0100 Enterprise IP Phone Customizing Your Phone
Xorcom Ltd. 15 www.xorcom.com
Function Keys: The hard function keys cannot be used until unlocked. You cannot
access the History, Message, Conference, Hold, Mute, Transfer, Redial,
√
, X keys, volume adjustment keys, navigation keys, DSS keys, and
the soft keys.
All Keys: All of the keys cannot be used until unlocked. You can only use the
phone to answer the incoming calls.
Lock&Answer: All of the keys except the key cannot be used until unlocked. The
incoming calls will be answered automatically and cannot end the call
by your party.
To enable keypad lock via phone user interface:
1)
Press -> Settings -> Advanced , enter the password, and then press .
2) Select to Keypad Lock option, and then press .
3) Press the navigation keys to select the desired keypad lock type.
4) Press to save the change or to cancel.
If keypad lock is enabled, the icon will be displayed on the top right corner of the
idle screen.
If the keypad lock type is Lock&Answer, an additional icon will be displayed
next to the icon.
To unlock the phone via phone user interface:
1)
Press , you are prompted for the password.
2) Enter the password, and then press , the phone will be unlocked.
The icon will disappear from the idle screen.
3) If the keypad lock type is Lock&Answer, you should press -> Settings ->
Advanced -> Keypad Lock and select Disable from the Keypad Lock field to
unlock the keypad lock
To enable keypad lock via web user interface:
Click on
Phone -> Preference to do the relating changes. Please refer to the
instructions above for the parameters’ detail.
Note:
1. The default password for unlock is admin .
2. Users can make emergency calls when the phone is locked.
Audio Settings
Volume
Sender Volume
You can adjust the sender volume of headset/handset/speakerphone via web user
interface.