Xerox WorkCentre 5020 System Administrator Manual Download Page 119

Page: 119 / 130

System Settings

119

353

Print Auditron

Select whether to enable or
disable the Print Auditron feature,
which tracks and counts prints
made on the machine per user
account.

NOTE:

To enable this feature,

select [1] (Enabled) under
Account Mode (menu number:
351).

0: Disabled
1: Enabled*

398

All Accounts Count Clear

Entering “0” clears the copy and
print counts for all user accounts.

401 to 499 Copy Count for Account

Number 1 - 99

NOTE:

When entering the

menu number, enter 4 plus the
account number. For example,
for account number 45, enter
"445" as the menu number.

Shows the total number of copies
made under an account number
from 1 to 99.

0 - 99,999

501 to 599 Print Count for Account

Number 1 - 99

NOTE:

When entering the

menu number, enter 5 plus the
account number. For example,
for account number 45, enter
"545" as the menu number.

Shows the total number of prints
made under an account number
from 1 to 99.

0 - 99,999

600

System Administrator User ID

Specify the System Administrator
User ID.

Up to 32 numerical
characters
(Default: 11111)

601 to 699 User ID for Account Number

1 - 99

NOTE:

When entering the

menu number, enter 6 plus the
account number. For example,
for account number 45, enter
"645" as the menu number.

Specify the user ID for an account
number from 1 to 99, using three
digits.

000 - 999

NOTE:

Entering “0” clears

all registered information
for a selected account
number, including the user
ID, passcode, copy/print
job limit, and copy/print
count.

700

System Administrator
Passcode

Specify the System Administrator
passcode.

4 to 12 numerical
characters

NOTE:

By default, the

System Administrator’s
passcode is not set.

701 to 799 Passcode for Account Number

1 - 99

NOTE:

When entering the

menu number, enter 7 plus the
account number. For example,
for account number 45, enter
"745" as the menu number.

Specify a passcode for an
account number from 1 to 99.

4 to 12 numerical
characters

NOTE:

By default, a

passcode for the account
number 1 - 99 is not set.
Entering "0" initializes the
passcode to null.

Menu

Number

Menu

Description

Value

Summary of Contents for WorkCentre 5020



































































































































Search results

Summary of Contents for WorkCentre 5020

Reviews:

Related manuals for WorkCentre 5020

Brands by name

Popular brands

Xerox WorkCentre 5020, System Administrator Manual

Search results

Summary of Contents for WorkCentre 5020

Reviews:

Related manuals for WorkCentre 5020

Brands by name

Popular brands