Xerox WorkCentre 5020, System Administrator Manual

Page: 41 / 130

Downloading Software
41
Downloading Software
This section describes how to manually upgrade the machine’s software.
1.
Open your web browser, and enter the machine's IP address in the [Address] box
to access CentreWare Internet Services.
2.
Click the [Properties] tab.
3.
On the collapsible menu of the Menu Panel, click the [Services] folder, and then
the [Machine Software] folder.
4.
Configure required settings.
5.
Click [Apply].
6.
If prompted, enter the System Administrator user ID and passcode, and click [OK].
NOTE: By default, the System Administrator user ID is "11111" and its passcode is not
set.
Upgrades
Upgrades
Specify whether the machine is to allow software downloads.
NOTE: To manually upgrade the machine software, Software Download must also be
set to [0] (Allow) in the System Setting Mode (menu number: 127). For more
information, refer to
System Settings on page 109
.
Manual Upgrade
Last Successful Upgrade
Displays the most recent version of the software.
Manual Upgrade
Specify the latest software file.
Printing the Configuration Report
This section describes how to print out the Configuration Report. The Configuration
Report lists the total number of prints, the machine's hardware configuration, network
information, and the status of various settings. Print this report to confirm the machine
configuration.
1.
On the Control Panel of the machine, hold down the <2> button for four seconds
or longer, and while holding down the <2> button, press the <Stop> button.
The Configuration Report is printed out.
2.
Read the Configuration Report to confirm the configuration of the machine.