Xerox WorkCentre 5020 System Administrator Manual Download Page 16

Page: 16 / 130

2 Maintenance

The following procedure describes how to replace the Drum Cartridge.

Make sure that the machine is not
processing a job, and then open the
Front Cover.

Open the Left Side Cover.

Lightly press the orange tab to unlock
the Drum Cartridge.

Pull out the Drum Cartridge carefully.

NOTE:

Do not touch the drum (blue roller)

when pulling out the Drum Cartridge.

Take a new Drum Cartridge out of the
box, and remove the packaging.

Insert the new Drum Cartridge halfway.

Add toner.

For information on how to add toner, refer to

Adding Toner to the Drum Cartridge on

page 12

NOTE:

A bottle of toner must be purchased separately when replacing the Drum

Cartridge.

Push the Drum Cartridge in until it locks into position.

Close the Left Side Cover and the Front Cover.

Summary of Contents for WorkCentre 5020



































































































































Search results

Summary of Contents for WorkCentre 5020

Reviews:

Related manuals for WorkCentre 5020

Brands by name

Popular brands

Xerox WorkCentre 5020, System Administrator Manual

Search results

Summary of Contents for WorkCentre 5020

Reviews:

Related manuals for WorkCentre 5020

Brands by name

Popular brands